LCI FurnacePros

   



 

OEM IR LAMPS

Original OEM Infrared Lamps for RTC furnaces (Exclusive, only available from LCI FurnacePros). ev17-03

 

RTC PRODUCTION LABORATORY FURNACES

Rebuilt SPECIAL LA-306 Compact Production/Lab IR Furnace

LA306 Special

ORANGE, CALIFORNIA, USA September 2017. We currently have an exceptional refurbished RTC LA-306. This industrial high temperature lab belt furnace is configured with an extra long exit entension adding 30 inches to the product Unload station and to the overall length of the furnace.

All new controls, internals, belt and motor

The furnace chamber includes brand new insulation for 1000°C operation, new plenums for CDA, nitrogen or forming gas operation.  Manufactured out of aircraft aluminum, the CACT cooling tunnel is also brand new. Perfect for thick film, annealing, solder reflow and dental lab applications.

Please email info@furnacepros.com if you are interested in this furnace.  ev17-04

THICK FILM FURNACES

"Low Miles" TP Solar TF-618 Infrared Furnace

Thick Film IR belt furnace

Newly manufactured in 2015 for a special project, this continuous belt production furnace features the TPS split casing design with MCL (motorized chamber lift) which allows the top of the heating chamber to be raised above the chamber bottom by wired remote while the furnace is down for maintenance.

This 1000°C furnace was designed for low oxygen processing with a 3-port sampling system and built-in Illinois Instruments EC-913 analyzer system for sampling furnace chamber gas. One extra port is provided for use of a auxiliary analyzer (aux analyzer and sample pump by owner).  

Atmosphere and Heat

Connect up to 3 process gases simultaneously. The PLC control system is designed for computer switching between combinations of CDA, Nitrogen and Forming Gas (FG<4.5% Hydrogen). Furnace chamber has 2" clearance height above the 18" wide belt. Heating chamber is 4-zone, 60 inches long. The furnace has 90 inches of water cooling followed by fan cooling section. The furnace chamber has 4 quartz ports in the top of each zone for a IR temperature measureing devices.

Cooling

The furnace has 90 inches of water cooling followed by fan cooling section. The furnace chamber has 4 quartz ports in the top of each zone for a IR temperature measureing devices.

The operating manual Ch0 Description for this furnace is located here (FO 15-004). ev17-06

 

Used Furnaces
New Furnaces
eMail for Quote

Corporate Offices:

30025 Alicia Pkwy #417
Laguna Niguel CA 92677 USA

P: 1.714.935-0302

Furnace Pros

Current Time
Orange County CA USA:

Office Hours:

Monday - Friday
7:00 AM - 4 PM PST

FurnacePros Furnace Pros for RTC Infrared IR Production Belt Furnace Help
RTC Radiant Technology Corporation is a trademark of BTU International, Inc.